error running viewml binary

[Mildred Frisco]

Hi ! I've tried to run the viewml on the strongarm platform with embedded
linux. The platform already has nano-X running. I've copied the shared
libraries to /usr/lib and created the file
/home/jasonk/projects/arm/microwin/src/bin/nano-X, since the program was
looking for it when I first tried to run it. then i typed the following
commands

$ nano-X &
$ viewml

viewml produced the following errors:

Client 153: wrong packet type 0 (expected 3)
Client 153: wrong packet type 240 (expected 3)
Client 153: wrong packet type 1 (expected 3)
Client 153: wrong packet type -2048 (expected 3)
.
.
.
Client 153: wrong packet type 2016 (expected 3)
Client 153: wrong packet type 31 (expected 3)
.
.
.


Please reply if you know this.

Thank you very much


mildred

[Greg Haerr]

Usually this means that the threading package isn't working properly.
Be sure to recompile everything from scratch.

Regards,

Greg
----- Original Message -----
From: Mildred Frisco
To: ViewML development list
Sent: Wednesday, February 05, 2003 7:42 PM
Subject: error running viewml binary




Hi ! I've tried to run the viewml on the strongarm platform with embedded linux. The platform already has nano-X running. I've copied the shared libraries to /usr/lib and created the file /home/jasonk/projects/arm/microwin/src/bin/nano-X, since the program was looking for it when I first tried to run it. then i typed the following commands

$ nano-X &
$ viewml

viewml produced the following errors:

Client 153: wrong packet type 0 (expected 3)
Client 153: wrong packet type 240 (expected 3)
Client 153: wrong packet type 1 (expected 3)
Client 153: wrong packet type -2048 (expected 3)
.
.
.
Client 153: wrong packet type 2016 (expected 3)
Client 153: wrong packet type 31 (expected 3)
.
.
.


Please reply if you know this.

Thank you very much


mildred

[Mildred Frisco]

This is the viewml binary that I've downloaded from the site. I copied the
libraries to /usr/lib. I forgot, though, to run the $ldconfig command. Do
you think this error has something to do with it ? But I'm not familiar
with ldconfig and I'm afraid that it might damage the system. Do you also
know where can I get a binary for arm of ldconfig ? Or its source ?
Thanks.

Mildred


From: "Greg Haerr" <***@censoft.com>
Subject: Re: error running viewml binary
Date: Wed, 5 Feb 2003 22:13:39 -0700
To: "ViewML development list" <viewml-***@viewml.com>


Usually this means that the threading package isn't working properly.
Be sure to recompile everything from scratch.

Regards,

Greg
----- Original Message -----
From: Mildred Frisco
To: ViewML development list
Sent: Wednesday, February 05, 2003 7:42 PM
Subject: error running viewml binary




Hi ! I've tried to run the viewml on the strongarm platform with
embedded linux. The platform already has nano-X running. I've copied the
shared libraries to /usr/lib and created the file
/home/jasonk/projects/arm/microwin/src/bin/nano-X, since the program was
looking for it when I first tried to run it. then i typed the following
commands

$ nano-X &
$ viewml

viewml produced the following errors:

Client 153: wrong packet type 0 (expected 3)
Client 153: wrong packet type 240 (expected 3)
Client 153: wrong packet type 1 (expected 3)
Client 153: wrong packet type -2048 (expected 3)
.
.
.
Client 153: wrong packet type 2016 (expected 3)
Client 153: wrong packet type 31 (expected 3)
.
.
.


Please reply if you know this.

Thank you very much


mildred

[Jason Kingan]

This probably isn't a problem with not running ldconfig. Usually, not running
this will cause missing lib errors and won't even load.

Looking at the original problem, this could also be a mismatch between two
different versions of Microwindows, where the structures have changed. I
don't know that they have, but is another possible problem.

Hope this helps,
Jason Kingan
Century Software

Post by Mildred Frisco
This is the viewml binary that I've downloaded from the site. I copied the
libraries to /usr/lib. I forgot, though, to run the $ldconfig command. Do
you think this error has something to do with it ? But I'm not familiar
with ldconfig and I'm afraid that it might damage the system. Do you also
know where can I get a binary for arm of ldconfig ? Or its source ?
Thanks.
Mildred
Subject: Re: error running viewml binary
Date: Wed, 5 Feb 2003 22:13:39 -0700
Usually this means that the threading package isn't working properly.
Be sure to recompile everything from scratch.
Regards,
Greg
----- Original Message -----
From: Mildred Frisco
To: ViewML development list
Sent: Wednesday, February 05, 2003 7:42 PM
Subject: error running viewml binary
Hi ! I've tried to run the viewml on the strongarm platform with
embedded linux. The platform already has nano-X running. I've copied the
shared libraries to /usr/lib and created the file
/home/jasonk/projects/arm/microwin/src/bin/nano-X, since the program was
looking for it when I first tried to run it. then i typed the following
commands
$ nano-X &
$ viewml
Client 153: wrong packet type 0 (expected 3)
Client 153: wrong packet type 240 (expected 3)
Client 153: wrong packet type 1 (expected 3)
Client 153: wrong packet type -2048 (expected 3)
.
.
.
Client 153: wrong packet type 2016 (expected 3)
Client 153: wrong packet type 31 (expected 3)
.
.
.
Please reply if you know this.
Thank you very much
mildred

#############################################################
This message is sent to you because you are subscribed to
the mailing list <viewml-***@viewml.com>.
To unsubscribe, E-mail to: <viewml-devel-***@viewml.com>
To switch to the DIGEST mode, E-mail to <viewml-devel-***@viewml.com>
To switch to the INDEX mode, E-mail to <viewml-devel-***@viewml.com>
Send administrative queries to <viewml-devel-***@viewml.com>